(Click image above to view drawing with dimensions)
SPAL high performance fans offer the ultimate advantage in airflow. Our enhanced motor design ensures that you get the maximum possible performance while benefiting from motor life that is second to none. The same attention to detail is evident inside each of these fans and allows them to survive even after full submersion in water.

Airflow: 3168 CFM
Voltage: 12 Volts
Min Current Draw: 39.2 Amps
Max Current Draw: 48.6 Amps
Weight: 10.6 lbs

- Sealed motor design
- Paddle blade design for low noise
- Compatible with FRH, 185FH, and 195FH wiring kits*
- Compatible with FAN-PWM Programmable Fan Controller**
- Available in Pull configuration only

* Please note that if you wish to purchase the SPAL wiring harness kit you will need 2 of them. This can be either 2 of the FRH kits, or 1 of the FRH kits along with the 185FH/195FH thermostat kit if you wish to have temperature control.
**When using the SPAL FAN-PWM controller only the speed of 1 fan can be controlled, just power will be controlled for the 2nd fan.